I make sure the level is the same, and that is about it.Some celebrities have instructional backgrounds aside from their IMDB scores, together with legislation levels. I'll have to hand screw in a few winds at the fork cap so I an jump on the fork and pogo stick it to move the oil in the marzel veins. Then I the same distance of the pre-measured height with the new level, making sure I have all the bubbles out and the rods primed with oil distance piece in place. I measure the other side and if both are equal, I will try to top the oil off to that old level I know.įirst, I will prime/pump the fork with the new oil. I can now place a measuring rod down the tube to pre-read the level. I do not let it extend all the way down to the tube. Now, before I remove any oil, I squat the fork on a rubber bumper. So, right side up on the last go around, drain the rod and see if that was empty or you see holes in the upper rod up at the top, etc., then forgetaboutit. Remember the center rod might be filled you initially turning the fork upside down. I walk back in 10 minutes and keep priming until she drains no more. I am going to prime it or pump it out as it sits there draining as dry as possible.
Now, I just turn the fork upside down and let it drain while hanging it upside down between a ladder, say. I break the top nut before I pull the forks. I can pull a fork, turn it upside down and drain it without that nasty hex bolt at the bottom of the leg.
after draining.Ī fork rebuild and assembled dry: 19.0 ~ +/- 0.14 oz. Kawi Lube may say 15-10 or find equivalent SAE 5W fork oil.Īmount for general service: Approx. I'll pop the forks, we change the oil in a How-To. Let me change my front tire(s) down the road some.
0 kommentar(er)
